Motorola MTP8000Ex Series Page 38 Feature User Manual Download

Page: 38 / 176

Annotation

Description

ISPLAY

Features a high resolution of 240 x 320 pixels and 262,144 colors. Supports
scalable fonts and high color images.

IDE

ONNECTOR

Provides connection for accessories. You can connect the following cables:

• Boot Programming/USB Data Cable Ex, PMKN4158_

• Serial Data Cable Ex, PMKN4159_

• USB Data Cable Ex, PMKN4160_

• E2EE KVL Cable Ex, PMKN4161_

NOTICE:

It is recommended to turn off the radio before connecting

accessories.

ENU

key

• From the home screen, press to enter the main menu.

• Used to enter context-sensitive menus.

PEAKER

OME

key

• Press and hold to turn on/off your radio.

• Press to end calls.

• Press to return to the home screen.

AVIGATION

key

Press up, down, left or right N

AVIGATION

key for list scrolling, while moving

around the menu hierarchy, or for alphanumeric text editing.

From the home screen, press to activate one of the following:

• Down N

AVIGATION

key – enters

Recent Calls

menu item.

• Up N

AVIGATION

key – changes

My Groups

talkgroup folder.

• Left and right N

AVIGATION

key – toggles through the talkgroups.

NOTICE:

A detailed list of compatible accessories is included in

Accessory Leaflet

. To obtain

the document, contact your service provider.

2.4

Display

This section presents the radio's default home screen elements.

MN002041A01–AA
Chapter 2: Getting Started

Send Feedback

Summary of Contents for MTP8000Ex Series
















































































































































































Search results

Summary of Contents for MTP8000Ex Series

Reviews:

Related manuals for MTP8000Ex Series

Brands by name

Popular brands

Motorola MTP8000Ex Series, Feature User Manual

Search results

Summary of Contents for MTP8000Ex Series

Reviews:

Related manuals for MTP8000Ex Series

Brands by name

Popular brands