Motorola MTP8000Ex Series, Feature User Manual

Page: 147 / 176

6.8
MS-ISDN
This feature adds to the radio ISDN number. You can choose between MS-ISDN and ISSI to address
the call, send the message or pre-defined templates. It works for both simplex and duplex calls, based
on the assigned ISDN number.
6.9
DTMF Overdial
This feature allows you to communicate with an automated answering device (for example, the voice
mail or answering machine) during an on-going private, phone or PABX call.
While in an on-going private, phone or PABX call, press the DTMF keys (0-9, *, #). When pressed, the
DTMF key sounds a tone and the entered digit is displayed on the screen.
6.10
Short Number Dial
This feature allows you to dial part of the full number of the person you wish to call. Your radio
automatically completes the number.
Example: Your radio number is 4282564.
1 Dial 564 (instead of 4282564, the full number).
2 To place the call, press the PTT button or the S
END
key.
6.11
SIM Card End-to-End Encryption
The table below presents interactions occurring between radios with and without SIM card. SIM card
provides End-to-End Encryption.
NOTICE: This is a BSI feature only.
Table 25: Radios Interactions
Transmission
Type Transmitting Ra-
dio Receiving Radio Result
Private Call SIM card No SIM card Call is not visible for the re-
ceiving radio. The transmit-
ting radio displays
Called
Party Clear Only message.
Private Call No SIM card SIM card Warning: clear call message
appears and the call is re-
ceived.
Group Call SIM card No SIM card Call is not visible for the re-
ceiving radio.
Group Call No SIM card SIM card Warning: clear call message
appears and the call is re-
ceived.
Table continued…
MN002041A01–AA
Chapter 6: Features
Send Feedback 147