32
Figure 12: Power settings
•
Always use AC power when connecting your MTC100
TETRA PDA to your PC
. Note that your MTC100 TETRA
PDA will not auto-suspend while it is connected.
•
Turn off sounds
. Use the Sounds & Notifications control
panel to turn off all but the must necessary system sounds.
•
Avoid using memory card accessories while on battery
power
. Some memory cards use considerable power and
will quickly drain your battery.
•
Do not "listen" for infrared transfers (beam)
. Although you
can set your MTC100 TETRA PDA to constantly monitor the
IR port for files sent from other devices, doing so quickly
drains the battery.
Program and Storage Memory
Your MTC100 TETRA PDA uses flash (non-volatile) memory
for programs and file storage. It uses RAM (Random Access
memory) whilst running programs. The Operating System
