19
Intr
oductio
n
Figure 6: Signalling LEDs on the MTC100 TETRA PDA
To determine the main battery’s current charge level, select
Start > Settings > System Tab > Power. The Power
Properties window displays the power left in your main
battery and backup battery.
7
Carrying Accessories
One of the following carrying solutions is supplied with your
TETRA PDA: either 1. Belt clip kit and carry strap kit or 2.
Carrying case. The belt clip kit and carry strap kit include all
screws and mounting material necessary for assembling.
8
Installing Belt Clip
1. If the carry strap mounting bar (see item 1 and “Position of the
Stylus Bracket” on page 24“Position of the Stylus Bracket” on
page 24“Position of the Stylus Bracket” on page 24Figure 9) is
fitted to the PDA, remove this using the screwdriver provided.
TETRA Service LED
Flashing green = In Service
Red = Out of Service
Flashing red = Connecting to
the network
Solid orange = Transmit inhibit
Power Status LED
Solid red = Battery charging
Green = Ready to use
(fully charged)
Blinking red = Error
W-LAN signal LED
(when fitted)
Green = Excellent
Yellow = Good
Blinking yellow = Poor
