16
2
Plugging into AC Power and Charging
Whilst pinching the sides of the adapter (1) plug it into the
bottom connector of the TETRA PDA. Fit the small power
plug (2) into the socket of the adapter. Plug the travel charger
(4) into the AC power wall outlet (3).
For the first charging process it is important to give the PDA a
complete uninterrupted charge to ensure that the battery is
fully charged (charge complete). The
Power Status LED
turns to solid red while charging and turns to green when
charging is complete.
After the battery is fully charged the first time, you can
charge, recharge, and/or operate your MTC100 TETRA PDA
with available AC power using the travel charger.
Use only the chargers and adaptors that
came with your MTC100 TETRA PDA for
charging.
Only use the designated Motorola
batteries for the MTC100 TETRA PDA.
NNTN6969A - 3600mAh high capacity.