Motorola MT2070 User Manual Download

Page: 242 / 606

8 - 2

MT2070/MT2090 User Guide

Connecting an RS-232 Interface

Connect the device directly to the host computer.

Figure 8-1

RS-232 Direct Connection

Attach the modular connector of the RS-232 interface cable to the cable interface port on the device.

Connect the other end of the RS-232 interface cable to the serial port on the host.

Connect the power supply to the serial connector end of the RS-232 interface cable. Plug the power supply
into an appropriate outlet.

Select the RS-232 host type by scanning the appropriate bar code from

RS-232 Host Types on page 8-6

To modify any other parameter options, scan the appropriate bar codes in this chapter.

Interface Cable

Serial Port

Connector to Host

Power Supply Cable

NOTE

Interface cables vary depending on configuration. The connectors illustrated in

Figure 8-1

are examples

only. The connectors may be different than those illustrated, but the steps to connect the device are the
same.

NOTE

Connect a power supply to the cradle (not shown) for fast charging.

Summary of Contents for MT2070































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MT2070

Reviews:

Related manuals for MT2070

Brands by name

Popular brands

Motorola MT2070, User Manual

Search results

Summary of Contents for MT2070

Reviews:

Related manuals for MT2070

Brands by name

Popular brands