Motorola MT2070, User Manual

Page: 139 / 606

Operating the MT2070/MT2090 2 - 91
Log On/Off
When the user selects Log On/Off, the device may be in one of two states; the user may be logged onto the device
by already entering credentials through the login box or there is no user logged on. Each of these states has a
separate set of use cases and a different look to the dialog.
Figure 2-118
Log On/Off Screen
User Already Logged In
If already logged into the device, the user can launch the login dialog for the following reasons:
•
Connect to a different profile.
•
Connect to and re-enable a cancelled profile. To do this:
• Launch the Log On/Off dialog.
• Select the cancelled profile from the profile drop-down list.
• Login to the profile.
•
Log off the device to prevent another user from accessing the current users network privileges.
•
Switch device users to quickly logoff the device and allow another user to log into the device.
No User Logged In
If no user is logged into the device, launch the login dialog and log in to access user profiles.
The Login dialog varies if it is:
•
Launched by WCS, because the service is connecting to a new profile that needs credentials.
•
Launched by WCS, because the service is trying to verify the credentials due to credential caching rules.
•
Launched by a user, when a user is logged in.
•
Launched by a user, when no user is logged in.
NOTE A cancelled profile can also be re-enabled by using the Manage Profile screen to connect to the cancelled
profile.