Figure 22 – Error Codes
MSAT-G2 Installation Guide
25
INVALID DN
NO TG
BLOCKED
X-OVER
FAILURE
RF POWER
FAILURE
ANTENNA
FAILURE
WARNING!
OVERHEAT
INVALID
PASSWORD
WRONG LOCK
CODE
Signifies the user has entered a
Directory Number (DN) that is not
a member of the private mode talk
group currently active on the radio.
No talk groups have been downloaded
to the radio.
Signifies that the radio's antenna signal
to the satellite is blocked.
Signifies that the user has initiated a
manual beam cross-over to a beam
that is not accessible. Following the
appearance of the failure message the
user will be returned to the beam
options list.
The radio detected a problem with its
RF transmissions and disabled that
transmitter.
This indicates the radio has detected a
fault in the antenna and shut it down.
Signifies that the radio is overheating.
This message will appear at 10 second
intervals until the temperature is
reduced. If the temperature continues
to increase then the radio will
shutdown.
Signifies the user has entered the
wrong Dealer or SYSTEM Menu
password.
Signifies the user has entered the
wrong Handset Lock code.
Ensure a valid DN is entered in tag
position 00.
If this condition persists, contact
MSV Customer Support.
Ensure that the antenna has a clear
line-of-sight to the satellite.
Ensure that the appropriate adjacent
satellite beam is chosen when
initiating a manual beam cross-over.
Power cycle the radio. If this
condition persists, contact MSV
Customer Support.
Power cycle the radio. If this problem
persists, contact MSV Customer
Support
Move the radio to a cooler place.
If the radio powers off, allow it to
cool down before re-initiating the
power-up sequence.
Enter the correct password. If the
password is unknown, contact MSV
Customer Support with the radio's
ESN. Customer Support can provide
a new SYSTEM password.
If you cannot remember the lock
code (default is 0000), enter the
SYSTEM password (default 1234)
when prompted to enter the code.
Summary of Contents for MSAT-G2
Page 1: ......
