Motorola MK4000 MicroKiosk, Product Reference Manual

Page: 62 / 136

5 - 16 MK4000 MicroKiosk for CE .NET 5.0 Product Reference Guide
Illegal ESS ID In the Build ESSID Partition window, no ESS ID was entered or the ESS ID
entered was illegal.
Disk Full TCM failed to create Hex image file at the selected path. Check available disk
space.
Target Disk Full Build process failed because TCM failed to add file to the image of a disk volume.
Remove some files or increase the disk size.
Hex file is READ ONLY The Hex image file to be created exists and is read-only. Delete the existing file or
change its attribute.
Error opening the file xxx with
write access TCM could not open file xxx with write access. Check if file is in use.
Failure creating binary file TCM failed to open/create an intermediate binary file.
Hex File To load is missing or
invalid In Load Terminal window, the file selected to load has invalid status.
Could not locate MK4000
name in TCM.ini file While loading the Script Properties window, TCM could not find the TCM.ini
section corresponding to the MK4000 type specified by the current opening script.
Either TCM.ini or the script file is invalid.
Incorrect disk sizes in TCM.ini
file The total disk size specified in the script does not match the total disk size defined
in the corresponding TCM.ini section. Check if the script is corrupt or the TCM.ini
has changed after the script was created.
INVALID DIRECTORY In Script Properties window, the selected System File Path is not a valid directory.
One of the disk sizes is one
sector in size In Script Properties window, one of the disks is too small (one sector in size). This
may cause problem while building images, especially when cushion is enabled.
Increase the disk size.
INVALID VOLUME NAME In Script Properties window, one of the volume labels is not valid.
Corrupt TCM.INI file! (Invalid
value of VolumeDivisor) The VolumeDivisor entry is missing or invalid in the TCM.ini. Reinstall TCM or
recover TCM.ini.
Invalid version of TCM script
file The TCM script was not created by this version of TCM.
Corrupt or missing TCM.ini
file TCM could not find TCM.ini file.
FAILED CONNECTION TO
COM PORT (Could not get
status) While downloading images to MK4000, TCM failed to connect to the selected
COM port. Check if the COM port is free and is properly configured.
FAILED CONNECTION TO
TERMINAL (Terminal Not
Connected Properly/Terminal
Not Ready to Receive) While downloading images, TCM failed to connect to the MK4000. Check if the
correct flow control protocol is selected and the MK4000 is properly connected
and is in a listening state.
Table 5-2
TCM Error Messages (Continued)
Error Description/Solution