Motorola MG7550 User Manual Download | Manualshive

Page: 62 / 63

background image

Compliance

FCC Interference Statement

This device has been tested and found to comply with the limits for a Class B digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against radio interference in a residential environment. This
device can generate, use and radiate radio frequency energy and, if not installed
and used in accordance with the instructions in this manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to cause interference, in which case the user, at his own expense, will
be required to take whatever measures are necessary to correct the interference. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

The device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.

Only coaxial cables are to be used with this device in order to ensure compliance
with FCC emissions limits. Accessories connected to this device by the user must
comply with FCC Class B limits. The manufacturer is not responsible for any
interference which results from use of improper cables, or which results from
unauthorized changes or modifications to the device.

«
...
60
61
62
63
»

Summary of Contents for MG7550
































































Reviews:

No comments

Related manuals for MG7550

Brand: Data-Linc Group Pages: 4

Brand: FTS Pages: 2

Brand: FALCOM Pages: 22

Brand: Paradyne Pages: 60

Brand: Erco & Gener Pages: 4

LandCell SMC-GPRS Series

Brand: CalAmp Pages: 84

Brand: Sixnet Pages: 30

Brand: DeVilbiss Pages: 38

Brand: Medion Pages: 2

Brand: Tait Pages: 30

Brand: FAAC Pages: 20

Brand: Adeunis RF Pages: 109

OfficeConnect 3C886A

Brand: 3Com Pages: 24

Brand: Guilin Feiyu Technology Pages: 9

Brand: IBM Pages: 35

Brand: CTC Union Pages: 43

Brand: Fritz! Pages: 250

Cerberus P 6331-42

Brand: Pentagram Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands