Motorola MC75 - Worldwide Enterprise Digital Assistant User Manual Download Page 91

Page: 91 / 202

Using Bluetooth 4 - 17

Ensure that the

Headset

profile is enabled on the MC75. See

Profiles Tab on page 4-32

for more information.

Use the

Connection Wizard

to search for a Bluetooth headset.

Select the device and tap

Next

Select the

Headset

service name and select

Connect

. The MC75 connects to the headset. Refer to the

headset user manual for instructions on communicating with a Bluetooth device.

Press the communication button on the headset. This routes both system and WAN call audio to the headset.

When a call is received on the MC75, tap the

Accept

button to answer the call.

Press the communication button on the headset to route the audio back to the MC75.

Hands-free Services

To connect to a Bluetooth headset:

Ensure the MC75 is discoverable and connectable. See

Device Info Tab on page 4-23

Ensure that the

Hands Free

profile is enabled on the MC75. See

Profiles Tab on page 4-32

for more

information.

Use the

Connection Wizard

to search for a Bluetooth hands-free headset.

Select the hand-free device and tap

Next

Select the

Hands-free

service name and select

Connect

. The MC75 connects to the headset. Refer to the

headset user manual for instructions on communicating with a Bluetooth device.

During an active connection, the MC75 cannot go into suspend mode when the Power Button is pressed. A
message appears notifying the user.

Once the WAN call is disconnected (with Hands-free profile) the Power button is enabled.

NOTE

When using a Bluetooth headset with Headset Services, you cannot accept or end a call from the headset.
You must accept or end a call on the MC75.

NOTE

If a wired headset is connected to the MC75, the Bluetooth headset connection is disconnected.

NOTE

Newer Bluetooth headsets are device dependant and remember the last device they connected to. If problems
occur while connecting to the headset, place the headset in discovery mode. Refer to the headset user manual
for more information.

Only WAN audio is routed to the headset. System audio is still emitted through the MC75 speaker.

You can accept calls and re-dial using the Hands-free profile.

Hands-free profile does not support 3-way calling.

Summary of Contents for MC75 - Worldwide Enterprise Digital Assistant











































































































































































































Search results

Summary of Contents for MC75 - Worldwide Enterprise Digital Assistant

Reviews:

Brands by name

Popular brands

Motorola MC75 - Worldwide Enterprise Digital Assistant, User Manual

Search results

Summary of Contents for MC75 - Worldwide Enterprise Digital Assistant

Reviews:

Brands by name

Popular brands