Motorola M68EVB912B32, User Manual

Page: 56 / 122

OPERATION
68EVB912B32UM/D 3-34
MD Memory Display MD
syntax:
MD <StartAddress> [<EndAddress>]
where:
<StartAddress> is a 16-bit hexadecimal number.
<EndAddress> is an optional 16-bit hexadecimal number.
The Memory Display command displays the contents of memory as both hexadecimal bytes and
ASCII characters, 16-bytes on each line. The <StartAddress> parameter must be supplied; the
<EndAddress> parameter is optional. When the <EndAddress> parameter is not supplied, a
single line is displayed.
The number supplied as the <StartAddress> parameter is rounded down to the next lower
multiple of 16, while the number supplied as the <EndAddress> parameter is rounded up to the
next higher multiple of 16 - 1. This causes each line to display memory in the range of $xxx0
through $xxxF. For example, if $205 is entered as the start address and $217 as the ending
address, the actual memory range displayed would be $200 through $21F.
restrictions:
None.
example:
>MD 800
0800 AA 04 37 6A - 00 06 27 F9 - 35 AE 78 0D - B7 56 78 20 ..7j..’.5.x..Vx
>MD 800 87f
0800 AA 04 37 6A - 00 06 27 F9 - 35 AE 78 0D - B7 56 78 20 ..7j..’.5.x..Vx
0810 B6 36 27 F9 - 35 AE 27 F9 - 35 9E 27 F9 - 35 BE B5 28 .6’.5.’.5.’.5..(
0820 27 F9 35 D6 - 37 B8 00 0F - 37 82 01 0A - 37 36 FF F0 ’.5.7...7...76..
0830 7C 10 37 B3 - 00 00 37 B6 - 00 0F AA 04 - A5 02 37 B6 |.7...7.......7.
0840 00 0F 27 78 - 37 6A 00 06 - 27 F9 35 78 - 27 F9 35 56 ..’x7j..’.5x’.5V
0850 78 0D B7 10 - 78 3B 37 86 - 00 DC 27 F9 - 35 48 78 57 x...x;7...’.5HxW
0860 37 86 00 DE - F5 01 EA 09 - 37 B5 0D 0A - 27 F9 36 2A 7.......7...’.6*
0870 A5 00 37 65 - 00 02 27 F9 - 35 E8 37 9C - 37 4C F5 02 ..7e..’.5.7.7L..
>