Motorola M68EVB912B32, User Manual

Page: 31 / 122

OPERATION
68EVB912B32UM/D 3-9
Table 3-1. D-Bug12 Command-Set Summary (continued)
Command Description
CALL [<Address>] Execute a user subroutine; return to D-Bug12 when
finished
DEVICE [
see description
] Select/define a new target MCU device
EEBASE <Address> Inform D-Bug12 of the target’s EEPROM base address
FBULK Erase the target processor’s on-chip Flash EEPROM
FLOAD <AddressOffset> Program the target processor’s on-chip Flash EEPROM
from S-Records
G [<Address>] Go — begin execution of user program
GT <Address> Go Till — set a temporary breakpoint and begin execution
of user program
HELP Display D-Bug12 command set and command syntax
LOAD [<AddressOffset>] Load user program in S-Record format*
MD <StartAddress> [<EndAddress>] Memory Display — display memory contents in hex
bytes/ASCII format
MDW <StartAddress> [<EndAddress>] Memory Display Word — display memory contents in hex
words/ASCII format
MM <Address> [<data>] Memory Modify — interactively examine/change memory
contents
MMW <address> [<data>] Memory Modify Word — interactively examine/change
memory contents
MOVE <StartAddress> <EndAddress>
<DestAddress> Move a block of memory
NOBR [<Address> <Address>...] Remove individual user breakpoints
RD Register Display — display the CPU register contents
REGBASE Inform D-Bug12 of the target I/O register’s base address
RESET Reset the target CPU
RM Register Modify — interactively examine/change CPU
register contents
STOP Stop execution of user code on the target processor and
place it in background mode