Motorola LEX L10g, User Manual

Page: 48 / 174

7 Tap Continue.
8 Fit your face in the Show Your Face screen. Center your face in the outlined area marked put
your face here. If the Face Unlock setup was successful, you receive a Face Captured
screen .
9 Tap Continue.
10 Choose one of the two backup methods listed; Pattern or PIN.
11 For a Pattern unlock, slide your finger to connect at least four dots in any pattern of your
choosing.
12 Repeat the pattern to confirm the choice.
13 For a PIN unlock, input a four digit PIN and repeat to confirm.
14 Tap OK.
Face Unlock is less secure than a pattern, PIN, or password. Someone who looks similar to you
could unlock your phone. The data used to identify your face is kept private on the phone.
The Security screen is re-displayed. The photographed face must be entered to unlock the device. To
configure the timeout for locking, see
Setting the Timeout for Locking on page 49 .
2.9.1.2
Specifying a Pattern
Prerequisites: The Pattern option must be selected for Screen lock.
When and where to use: Use this procedure to specify a pattern to unlock your device:
Procedure:
1 Tap .
2 Tap .
3 Tap Security lock.
4 Select Pattern.
5 Using a finger, draw a pattern to unlock your device.
6 Tap Continue.
7 Draw the same pattern again.
8 Tap Confirm.
The Security screen is re-displayed.
A pattern must be entered to unlock the device.
2.9.1.3
Specifying a PIN or Password
Prerequisites: The PIN or Password option has been selected for Screen lock.
When and where to use: Use this procedure to specify a PIN or password to unlock your LEX L10g:
Procedure:
1 Tap .
2 Tap .
MN002858A01-A
Chapter 2: Getting Started
48 Send Feedback