Motorola LEX L10g, User Manual

Page: 49 / 174

3 Tap Security lock.
4 Select PIN or Password.
5 Enter a pin or password.
6 Tap Continue.
7 Enter the pin or password again.
8 Tap OK.
The Security screen is re-displayed.
A pin or password must be entered to unlock the device.
2.9.1.4
Setting the Timeout for Locking
Prerequisites: Screen lock must be set to Pattern, PIN, or Password.
When and where to use: Use this procedure to set the timeout value to lock the LEX L10g:
Procedure:
1 Tap .
2 Tap .
3 Tap Security.
4 Tap Automatically lock.
A list of timeout values is displayed.
5 Select a timeout value from the list.
6 The Security screen is re-displayed.
2.9.2
Unlocking the Device
When the LEX L10g is not used for a period of time and the user tries to access the device, the Lock
screen displays.
Depending on which Screen lock option is active, the user does one of the following:
• Nothing
• Slide the slider to the unlock position
• Enter and a pattern, pin, password, or display a face.
2.9.2.1
Unlocking the LEX L10g Face Unlock
When and where to use: The Face Unlock option must be selected for Screen lock
Use this procedure to unlock your LEX L10g with your face.
Procedure:
1 Press and release the power button.
MN002858A01-A
Chapter 2: Getting Started
Send Feedback 49