Motorola LEX L10g, User Manual

Page: 158 / 174

10.3
Desktop Cradle
A desktop cradle provides an alternative method to charge your LEX L10g.
The desktop cradle:
• Provides power for charging and operating the device.
• Enables connecting a mouse to the device.
Figure 107: Desktop Cradle
Charging the LEX L10g
To charge the device, insert the units by placing the bottom of the device, at a slight forward angle, into
the cradle.
The LED shows the status of the battery charging. See Battery Charge LED Status for charging status
indications. The 2280 mAh battery charges in approximately four hours.
Charge the LEX L10g device in temperatures from 0°C to +45°C (32°F to 113°F) ). Note that charging
is intelligently controlled by the device. To accomplish this, for small periods of time, the LEX L10g
alternately enables and disables battery charging to keep the battery at acceptable temperatures. The
device indicates when charging is disabled due to abnormal temperatures via its notification LED.
10.4
Vehicle Cradle
Install the vehicle mount on the surface of the vehicle that is reasonably flat and free of dirt and oil.
Clean the mounting surface with a glass cleaner and a clean cotton cloth. Install the vehicle mount on
the windshield or other flat car surface.
CAUTION: Some states prohibit the mounting of any electronic device in any location on the
vehicle dashboard. Be sure to check with local laws acceptable mounting areas before installing
the auto mounting kit.
MN002858A01-A
Chapter 10: Accessories
158 Send Feedback