Motorola LEX L10g, User Manual

Page: 138 / 174

5 Scroll through the list and select the desired WLAN network.
6 For open networks, tap profile once or press and hold and then select Connect to network or
for secure networks enter the required password or other credentials then tap Connect. See
technical support for more information.
The LEX L10g obtains a network address and other required information from the network using
the dynamic host configuration protocol (DHCP) protocol.
7 In the Wi-Fi setting field, Connected displays indicating that the device is connected to the
WLAN.
8.2.2
Configuring a Wi-Fi Network
When and where to use: Use this procedure to configure a Wi-Fi network.
Procedure:
1 Tap .
2 Tap .
3 Tap Wi-Fi.
4 Slide the switch to the ON position.
The LEX L10g searches for WLANs in the area and lists them on the screen.
5 Scroll through the list and select the desired WLAN network.
6 Tap the desired network.
If the network security is Open, the device automatically connects to the network. For all other
network security a dialog box appears.
Figure 95: WLAN Network Security Dialog Boxes
NOTICE: By default, the network Proxy is set to None and the IP settings is set to
DHCP.
MN002858A01-A
Chapter 8: Wireless
138 Send Feedback