Motorola IDEN LM 3000E Getting Started Download Page 53

Page: 53 / 77

You can place an Emergency Group Call to either the currently selected
talkgroup or to the pre-programmed emergency talkgroup.

•

Currently Selected Talkgroup

The currently
selected talkgroup
will be selected
when you press
the Emergency
key.

•

Pre-Programmed
Emergency Talk-
group

Your organization

may have pro-
grammed your
radio to automati-
cally go to a spe-
cific Emergency
Talkgroup when
you press the
Emergency key.

Press the PTT to
talk.

The initiator can-
not exit the emer-
gency call without
first cancelling the
emergency call.

The third line will
show the alias or
ID of the talk
group member
who is transmit-
ting.

If you place an
emergency call to
the currently
selected talk-
group, the second
line will stay the
same and not
flash.

The second line
will flash to indi-
cate the unit is
affiliating with
the pre-pro-
grammed emer-
gency talkgroup.

The initiator of
the Emergency
Call is blocked
from receiving
any Phone, Pri-
vate, Call Alerts,
Message Mail,
and Status Mes-
sages for the
duration of the
emergency call.

Summary of Contents for IDEN LM 3000E














































































Search results

Summary of Contents for IDEN LM 3000E

Reviews:

Brands by name

Popular brands

Motorola IDEN LM 3000E, Getting Started

Search results

Summary of Contents for IDEN LM 3000E

Reviews:

Brands by name

Popular brands