manualshive.com logo in svg

Motorola IDEN LM 3000E, Getting Started

Share
Download
Motorola IDEN LM 3000E Getting Started Download Page 37

37

Radio ID List Programming

Allows you to add, edit, and erase the 
pre-programmed list of radio IDs for 
making Private Conversations and 
sending Call Alerts and Status Messages.
Each radio ID can be up to five digits
long and can be given an 11-character
name (alias).

Talkgroup List Programming

Allows you to add, edit, and erase the 
pre-programmed list of talkgroup IDs 
for making Group Calls. Each talkgroup 
ID can be up to three digits long and can 
be given an 11-character name (alias).

Service Area List Programming

Allows you to add, edit, and erase the 
pre-programmed list of service areas for 
making Group Calls. Each service area 
can be up to two digits long and can be 
given an 11-character name (alias).

Status List Programming

Allows you to add, edit, and erase the 
pre-programmed list of status messages
for sending Status Messages. Each Status
Message can be up to three digits long
and can be given an 11-character name
(alias).

Feature Name

Example

and Description

Display

Summary of Contents for IDEN LM 3000E














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands