manualshive.com logo in svg

Motorola IDEN LM 3000E, Getting Started

Share
Download
Motorola IDEN LM 3000E Getting Started Download Page 22

21

You can place an Emergency Group Call to either the currently selected
talkgroup or to the pre-programmed emergency talkgroup, depending on
how your radio is programmed.

•

Currently Selected
Talkgroup

The currently
selected talkgroup
will be selected
when you press
the Emergency
key.

•

Pre-Programmed
Emergency Talk-
group

Your organization

may have pro-
grammed your
radio to automati-
cally go to a spe-
cific Emergency
Talkgroup when
you press the
Emergency key.

2. Press the PTT to

talk.

The initiator cannot
exit the emergency
call without first
cancelling the emer-
gency call.

The display will
show the alias or ID
of the talk group
member who is
transmitting.

If you place an
emergency call to
the currently
selected talk-
group, the second
line will stay the
same and not
flash.

The second line
will flash to indi-
cate the unit is
affiliating with
the pre-pro-
grammed emer-
gency talkgroup. 

The initiator of
the Emergency
Call is blocked
from receiving
any Private Call,
Call Alerts, and
Status Messages
for the duration of
the emergency
call.

The second line
will show the
talkgroup along
with the ID (alias)
of the person cur-
rently transmit-
ting.

Summary of Contents for IDEN LM 3000E














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands