manualshive.com logo in svg

Motorola IDEN LM 3000E, Getting Started

Share
Download
Motorola IDEN LM 3000E Getting Started Download Page 38

38

Speaker Volume

Volume is displayed as a bar graph. 
Seven bars indicate maximum 
volume.

Use the On/Off Power/Volume knob
on the front of the radio to adjust the 
volume.

Note:

If the Speaker Volume Set Tone is 

set to OFF, you will not hear the speaker
volume adjustment tones.

Keypad Volume

Allows you to adjust the keypad volume. 
Volume is displayed as a bar graph.
Seven bars indicate maximum volume.
You can silence the keypad by 
decreasing the volume until “SILENT” 
appears on the display.

Keypad Volume is listed under the
MENU key.  Press 

SEL

when you get

to the Keypad display to use the
keys to adjust the volume.

Speaker Volume Set Tone

Disabling this feature (OFF) will 
prevent speaker volume adjustment 
tones from being heard. When this  
feature is enabled (ON), a tone 
will be heard indicating the 
volume level of the speaker.

Feature Name

Example

and Description

Display

Summary of Contents for IDEN LM 3000E














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands