
GSM-204-423
Visiting the site
31st Oct 01
Installation & Configuration: Horizon
macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION
Inst. 2–9
Visiting the site
Overview of
visiting the site
When preparing to do work at a site and upon arrival, follow the instructions
provided in this section.
Before
departure to
site
Before departing to the site:
1.
Ensure that team members have adequate test equipment, tools, and
hardware to carry out the task. Check for any special requirements.
2.
Contact the person in charge of the site to advise of the team’s estimated
time of arrival and the expected duration of their stay on the site. This will
usually have been dealt with previously, but it is always advisable to make
sure that the information has been passed on.
3.
Ensure that the team read the site access details on each visit to a site as
local regulations may change.
Arrival at all
sites
When entering any site:
1.
Do not enter the site until contact has been made with the OMC-R or
MSC. Contact the local OMC-R and local MSC to announce the team’s
arrival before entering the site.
2.
Enter the site and check for site alarms, for example intruder alarms, that
may have been activated by entry.
3.
Read any local instructions.
Arriving at
occupied sites
In any exchange or occupied building, contact the person in charge or caretaker
of the site, who will explain local regulations. This person may also advise teams
on parking, rubbish removal, and canteen facilities.