Motorola DS9208-1D Product Reference Manual Download Page 17

Page: 17 / 276

About This Guide

Notational Conventions

The following

conventions are used in this document:

•

Italics

are used to highlight the following:

•

Chapters and sections in this and related documents

•

Dialog box, window and screen names

•

Drop-down list and list box names

•

Check box and radio button names

•

Bold

text is used to highlight the following:

•

Key names on a keypad

•

Button names on a screen.

•

bullets (•) indicate:

•

Action items

•

Lists of alternatives

•

Lists of required steps that are not necessarily sequential

•

Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists.

•

Throughout the programming bar code menus, asterisks (

) are used to denote default parameter

settings.

Related Documents

•

DS9208 Quick Start Guide

, p/n 72-140088-xx - provides general information for getting started with the

DS9208 digital scanner, and includes basic set up and operation instructions.

•

Advanced Data Formatting Programmer Guide

, p/n 72E-69680-xx - provides information on ADF, a

means of customizing data before transmission to a host.

For the latest version of this guide and all Motorola guides, go to:

http://www.motorolasolutions.com/support

Baud Rate 9600

Feature/Option

Indicates Default

Summary of Contents for DS9208-1D





















































































































































































































































































Search results

Summary of Contents for DS9208-1D

Reviews:

Related manuals for DS9208-1D

Brands by name

Popular brands

Motorola DS9208-1D, Product Reference Manual

Search results

Summary of Contents for DS9208-1D

Reviews:

Related manuals for DS9208-1D

Brands by name

Popular brands