Advanced settings
19
EN
Registration
Up to 5 handsets can be registered to one base station. Additional handsets must be registered
to the base before you can use them.
• The instructions described below apply specifically to your D1010 handset. If you wish to
register another manufacturer’s handset, the instructions may vary. In this case, please refer to
the manufacturer of the additional handset.
• The Master PIN is required before you can register or unregister handsets. The default PIN is
0000
.
Register a handset
At the base:
1.
Press and hold the
p
button on the base station for at least 3 seconds. The base station
emits a beep when it is ready to accept registration. You have 90 seconds in which to register
a handset.
At the handset:
1.
Press
m
and scroll
d
to
ADVANCED SET
and press
m
.
2.
Scroll
d
to
REGISTRATION
and press
m
.
3.
If necessary, scroll
u
or
d
to display
REGIST. BASE
and press
m
.
BASE 1 2 3 4
is displayed and
the registered base number is flashing.
Enter the number of the base on which you wish to
register your handset.
If you have only 1 base station, press
1
. If you have 2 base stations, press
1
or
2
, etc.
4.
When the display shows
PIN
----, enter the base PIN.
- When the handset registers with the base, it is assigned a handset number.
Select a base
You can register your D1010 handset with up to 4 bases. Once registered, you can switch
between bases, for example, bases at home and at work.
1.
Press
m
and scroll
d
to
ADVANCED SET
and press
m
.
2.
Scroll
d
to
REGISTRATION
and press
m
.
3.
SELECT BASE
is displayed. Press
m
.
- The available bases are displayed with the current base number flashing.
4.
Enter the number of the base you want – 1,2,3 or 4 and press
m
.
- When the base is found you hear a beep. If not found, the display shows
UNREGISTERED
.
Unregister a handset
1.
Press
m
and scroll
d
to
ADVANCED SET
and press
m
.
2.
Scroll
d
to
UNREGISTER
and press
m
.
3.
Enter the 4 digit master PIN and press
m
.
- Display shows the registered handset numbers.
4.
Scroll
u
or
d
to select the handset you want to delete and press
m
.
-
UNREGISTERED
is displayed on the handset screen.
PIN
The 4-digit master PIN is used when registering or unregistering a handset and when changing
some settings on your D1010. The default setting is 0000. You can change this PIN for more
security.
1.
Press
m
, scroll
d
to
ADVANCED SET
and press
m
.
2.
Scroll
d
to
PIN
. Press
m
.
3.
Enter the current 4 digit master PIN and press
m
. (Default setting 0000).
4.
Enter the new PIN and press
m
.
NOTE
Make a note of your PIN. If you forget your PIN you will need to reset your product.
Reset
This will reset your D1010 to its default settings.
1.
Press
m
, scroll
d
to
ADVANCED SET
and press
m
.
2.
Scroll
d
to
RESET UNIT
. Press
m
.
3.
CONFIRM?
is displayed. Press
m
.
NOTE
Entries stored in the phonebook and new answer machine messages are retained.
