18
Advanced settings
8. Advanced settings
This setting is useful to access certain network and PABX/switchboard services.
Recall time
The default D1010 recall time is suitable for your country and network operator. It is unlikely that
you should need to change this setting unless advised to do so.
1.
Press
m
, scroll
d
to
ADVANCED SET
and press
m
.
2.
RECALL TIME
is displayed. Press
m
.
3.
Press
u
or
d
to select the setting you want:
SHORT
,
MEDIUM
,
LONG
.
4.
Press
m
to confirm.
5.
Press
>
to return to standby.
NOTE
The use of your D1010 cannot be guaranteed on all PABX.
Dial mode
The default D1010 dialling mode is suitable for your country and network operator. It is unlikely
that you should need to change this setting unless advised to do so.
1.
Press
m
, scroll
d
to
ADVANCED SET
and press
m
.
2.
Scroll
d
to
DIAL MODE
. Press
m
.
3.
Press
u
or
d
to select
TONE
or
PULSE
.
4.
Press
m
to confirm.
5.
Press
>
to return to standby.
Temporarily switch from Pulse to Tone dialling
1.
Press and hold
*
.
The dial mode will change from Pulse to Tone for the duration of the call.
Call barring
Prevent certain numbers from being dialled from your D1010. Store up to four specific numbers,
each up to 4 digits – for example, international or local prefixes.
Bypass call barring by switching the setting Off or On.
NOTE
If you switch Call barring on,
BARR MODE ON
will be displayed on your screen in standby mode.
Switch call barring on/off
1.
Press
m
, scroll
d
to
ADVANCED SET
and press
m
.
2.
Scroll
d
to
CALL BARRING
. Press
m
.
3.
Enter the master PIN (default setting 0000) and press
m
.
4.
MODE
is displayed. Press
m
.
5.
Press
u
or
d
to select
ON
or
OFF
. Press
m
to confirm.
6.
Press
>
to return to standby. You can now set the number
(See below).
Set a number to be barred
1.
Press
m
, scroll
d
to
ADVANCED SET
and press
m
.
2.
Scroll
d
to
CALL BARRING
. Press
m
.
3.
Enter the master PIN (default setting 0000) and press
m
.
4.
Scroll
d
to
NUMBER
. Press
m
.
5.
If necessary, scroll
u
or
d
to the next available slot.
6.
Press
m
and enter the number or prefix you want to bar. Press
m
to confirm.
7.
Press
>
to return to standby.
Easy call
When activated, this feature allows you to dial a number by pressing any key on your handset
(except
>
). This feature is very useful for access to emergency services.
Switch easy call on/off
1.
Press
m
, scroll
d
to
ADVANCED SET
and press
m
.
2.
Scroll
d
to
EASY CALL
. Press
m
.
3.
Enter the master PIN (default setting 0000) and press
m
.
4.
MODE
is displayed. Press
m
then press
u
or
d
to select
ON
or
OFF
. Press
m
to confirm.
5.
Press
>
to return to standby.
NOTE
If you switch Easy call on,
EASY CALL ON
will be displayed on your screen in standby mode.
To switch Easy call off again:
1.
Press
>
.
2.
OFF?
is displayed. Press
m
to confirm.
Set the easy call number
1.
Press
m
, scroll
d
to
ADVANCED SET
and press
m
.
2.
Scroll
d
to
EASY CALL
. Press
m
.
3.
Enter the master PIN (Default setting 0000) and press
m
.
4.
Scroll
d
to
NUMBER
. Press
m
.
5.
Enter the number. Press
m
to confirm
6.
Press
>
to return to standby.
Dial an easy number
When an easy call number has been stored and the easy call setting switched on, press any key
(apart from
>
), to dial a number.
NOTE
When easy call is switched on, you can still answer any incoming call as normal.
