background image

communication equipment in perfect operating
condition. A nationwide service organization is
provided by Motorola to support maintenance
services. Through its maintenance and installation
program, Motorola makes available the finest service
to those desiring reliable, continuous communications
on a contract basis. For a contract service agreement,
please contact your nearest Motorola service or sales
representative, or an authorized Motorola dealer.

Battery Care

Battery Charge Status

Your radio can indicate the battery’s charge status
through:

the LED and sounds.

the fuel gauge icon on the display.

LED and Sounds

When your battery is low:

the LED blinks red when the PTT button is
pressed.

you hear a low-battery “chirp” (short, high-pitched
tone).

Fuel Gauge Icons

A blinking fuel gauge icon ( ) is displayed only when
the battery voltage drops to low level. In this case,
replace the battery with a fully charged one.

Gauge

Battery Charge

76% to 100% full

[3]

51% to 75%

[3]

26% to 50%

[3]

11% to 25%

[3]

10% or less (at 10%, the gauge
begins blinking)

Helpful Tips

88

English

Summary of Contents for APX 8000XE













































































































Reviews: