Motorola APX 8000XE User Manual Download Page 5

Page: 5 / 108

Viewing a Scan List.............................46
Viewing and Changing the Priority

Status.............................................46

Scan.............................................................. 46

Turning Scan On or Off.......................46
Making a Dynamic Priority Change

(Conventional Scan Only).............. 46

Deleting a Nuisance Channel............. 47
Restoring a Nuisance Channel........... 47

Call Alert Paging............................................ 47

Receiving a Call Alert Page................ 48

Emergency Operation....................................48

Sending an Emergency Alarm............ 49
Sending an Emergency Call

(Trunking Only).............................. 49

Sending an Emergency Alarm with

Emergency Call............................. 50

Sending a Silent Emergency Alarm.... 51
Change of Channels during

Emergency.....................................51

Emergency Keep-Alive Feature.......... 51
Emergency Find Me............................52

Fireground (Conventional Only).....................52

Entering Fireground Zone Channel.....53
Responding to Evacuation Indicator... 54

Tactical Public Safety (TPS)

(Conventional Only).................................. 54

Using TPS Normal Transmission........54
Using TPS Emergency

Transmission................................. 54

Man Down..................................................... 55

Pre-Alert Timer....................................57
Post-Alert Timer.................................. 57
Radio Alerts When Man Down

Feature is Triggered...................... 57

Triggering Emergency.........................57
Radio Alerts When Man Down

Enhanced is Triggered...................58

Exiting Man Down Feature..................58
Re-Initiating Man Down.......................59
Testing the Man Down Feature...........59

Secure Operations.........................................59

Selecting Secure Transmissions.........60
Selecting Clear Transmissions........... 60
Managing Encryption.......................... 61

Global Positioning System / Global

Navigation Satellite System...................... 64

GPS Operation................................... 64
GPS Performance Enhancement........65
Peer-Location on the Display

(ASTRO Conventional only).......... 66

Trunking System Controls............................. 67

Operating in Failsoft System...............67
Out-of-Range Radio............................67

Contents

English

Summary of Contents for APX 8000XE













































































































Search results

Summary of Contents for APX 8000XE

Reviews:

Related manuals for APX 8000XE

Brands by name

Popular brands

Motorola APX 8000XE, User Manual

Search results

Summary of Contents for APX 8000XE

Reviews:

Related manuals for APX 8000XE

Brands by name

Popular brands