manualshive.com logo in svg

Motorola APX 8000XE, User Manual

Share
Download
Motorola APX 8000XE User Manual Download Page 80

When mixing SSA with received voice audio,
the SSA alert is reduced in volume to ensure
that the voice message is still heard clearly.
Therefore, it is important that the SSA audio
files are created with clear loud audio to
ensure they can still be heard clearly when
played at reduced levels.

Wi-Fi

This feature allows you to turn Wi-Fi

®

 on or off. Wi-Fi

can be used for wireless programming of the radio
with the Radio Management tool.

Note:
Wi-Fi Network Name (SSID) for the radio to
connect to must be preprogrammed by a
qualified radio technician. Check with your
dealer or system administrator for more
information

Turning Wi-Fi On or Off

Turning Wi-Fi

®

 on or off via the preprogrammed

button:

a) To toggle the Wi-Fi on or off, press the

preprogrammed Wi-Fi button.

This button must be preprogrammed by a
qualified radio technician. Check with your
dealer or system administrator for more
information.

The display shows 

WIFI ON

 or 

WIFI OFF

.

Checking the Wi-Fi Configuration and Status of the
Radio

Long press the preprogrammed Wi-Fi button.
The display shows the current status of the Wi-Fi

®

as described next.

WF SRCHG

Looking for available Wi-Fi
networks that have been
preprogrammed into the radio.

WF CNTG

In the process of connecting to a
found Wi-Fi network.

WF CNTD

Connected to one of the
preprogrammed Wi-Fi networks.

NO
SERVICE

No available networks or
connection with one of the
networks failed.

Advanced Features

78

English

Summary of Contents for APX 8000XE













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands