Motorola APX 6000 User Manual Download Page 88

Page: 88 / 200

If the target radio does not respond after a
preprogrammed period of time, the display
shows

Send page?

d) To send the call alert page, press the

Menu

Select

button directly below

Yes

. To exit the

screen without sending the call alert page,
press the

Menu Select

button directly below

The display shows

Paging...<Alias>

If the call alert page is sent successfully, you
hear a tone and the display shows

Ack

received

. The radio returns to the Home

screen.

If the call alert page is not acknowledged, you
hear a low tone and the display shows

acknowledge

. Press the

Menu Select

button

directly below

to return to the main screen of

Contacts

Emergency Operation

The Emergency feature is used to indicate a critical
situation.

If the

Top (Orange)

button is preprogrammed to send

an emergency signal, this signal overrides any other
communication over the selected channel.

Your radio supports the following Emergency modes:

• Emergency Alarm
• Emergency Call (Trunking Only)
• Emergency Alarm with Emergency Call
• Silent Emergency Alarm

Check with your dealer or system administrator for
more information on the programming of this feature.

Each channel can only assigned one of the
Emergency modes above. The radio responds
differently when pressing the preprogrammed

Emergency

button in each channel.

Note:

To exit emergency at any time, press and hold

the preprogrammed Emergency button for about a
second.

The radio operates in the normal dispatch manner
while in Emergency Call, except if enabled, it returns
to one of the following:

Advanced Features

English

Summary of Contents for APX 6000









































































































































































































Search results

Summary of Contents for APX 6000

Reviews:

Related manuals for APX 6000

Brands by name

Popular brands

Motorola APX 6000, User Manual

Search results

Summary of Contents for APX 6000

Reviews:

Related manuals for APX 6000

Brands by name

Popular brands