Motorola APX 6000 User Manual Download Page 114

Page: 114 / 200

Logging in via the Two-Factor Authentication

Perform one of the following actions:

• Press the preprogrammed

User Login

button.

•

or to

User

, and press the

Menu Select

button directly below

User

The display shows the

User Login

screen.

Perform one of the following actions:

•

or to

[ID Entry]

and press the

Menu

Select

button directly below

Edit

. A blinking

cursor appears. Use the

keypad

to type or edit

a username. Press the

Menu Select

button

directly below

to submit.

•

or to scroll through the list of predefined

usernames. Press the

Menu Select

button

directly below

Sel

to select the predefined

username.

• Press and hold or to scroll through the

list of predefined usernames at a fast scroll
rate. Press the

Menu Select

button directly

below

Sel

to select the predefined username.

If the selected predefined username has more
than the maximum allowed characters, or an

invalid character in it, the display shows
momentary

Invalid ID

For radio enabled with Unit ID, Perform one of the
following actions:

•

or to

[UnitID Entry]

and press the

Menu Select

button directly below

Edit

. A

blinking cursor appears. Use the

keypad

type or edit a Unit ID. Press the

Menu Select

button directly below

to submit.

•

or to scroll through the list of predefined

Unit IDs. Press the

Menu Select

button directly

below

Sel

to select the predefined Unit ID.

• Press and hold or to scroll through the

list of predefined Unit IDs at a fast scroll rate.
Press the

Menu Select

button directly below

Sel

to select the predefined Unit ID.

If the selected predefined Unit ID has more than
the maximum allowed characters, or an invalid
character in it, the display shows momentary

Invalid UnitID

Enter your password when you see a blinking
cursor.

Advanced Features

110

English

Summary of Contents for APX 6000









































































































































































































Search results

Summary of Contents for APX 6000

Reviews:

Related manuals for APX 6000

Brands by name

Popular brands

Motorola APX 6000, User Manual

Search results

Summary of Contents for APX 6000

Reviews:

Related manuals for APX 6000

Brands by name

Popular brands