Motorola AP-7131 Series, Installation Manual

Page: 32 / 58

AP-7131 Series Access Point: Installation Guide 26
access point could be operating illegally unless set to operate in the correct country. Proceed
to “
Configuring “Basic” Device Settings
” on page 26 to validate the country setting.
3.1 Resetting the Access Point’s Password
The access point has a means of restoring its password to its default value. Doing so also reverts the
access point’s security, radio and power management configuration to their default settings. Only an
installation professional should reset the access point’s password and promptly define a new
restrictive password.
To contact Motorola Support in the event of a password reset requirement, go to
http://www.symbol.com/contactsupport .
3.2 Configuring “Basic” Device Settings
Configure a set of minimum required device settings within the Quick Setup screen. The values
(LAN, WAN etc.) can often be defined in other locations within the menu tree. When you change the
settings in the Quick Setup screen, the values also change within the screen where these parameters
also exist. Additionally, if the values are updated in these other screens, the values initially set within
the Quick Setup screen will be updated.
To define a basic access point configuration:
NOTE
Though the access point can have its basic settings defined using a
number of different screens, Motorola recommends using the
AP-7131
Quick Setup screen to define a minimum required configuration from one
location.
CAUTION Only a qualified installation professional should set or restore the
access point’s radio and power management configuration in the
event of a password reset.
NOTE Beginning with the 4.0 release of the access point firmware, a new
scheme for radio configuration and WIPS server management has been
implemented within the Quick Setup GUI applet. Up to eight radio buttons
are now available (depending on the number radios supported by the
SKU). These radio buttons define how WLAN and WIPS are supported
amongst the radios available to the access point. The options available
depend strictly on the SKU supported (and are described within this
section).
!