Motorola AP-7131 Series Installation Manual Download Page 51 | Manualshive

Page: 51 / 58

background image

Regulatory Compliance

45

Declarações Regulamentares para AP7131N - Brasil

Nota: A marca de certificação se aplica ao Transceptor, modelo AP-7131N. Este equipamento opera em caráter secundário,
isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar
interferência a sistemas operando em caráter primário. Para maiores informações sobre ANATEL consulte o site:

www.anatel.gov.br

Chile

Este equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria de telecomunicaciones, relativa a radiaciones
electromagnéticas.

This device complies with the Resolution Not 403 of 2008, of the Undersecretary of telecommunications, relating to
electromagnetic radiation.

Mexico

Restrict Frequency Range to: 2.450 – 2.4835 GHz.

Taiwan

NOTICE!

According to: Administrative Regulations on Low Power Radio Waves Radiated Devices

Article 12

Without permission granted by the DGT, any company, enterprise, or user is not allowed to change frequency, enhance
transmitting power or alter original characteristic as well as performance to a approved low power radio-frequency devices.

Article 14

The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found,
the user shall cease operating immediately until no interference is achieved. The said legal communications means radio
communications is operated in compliance with the Telecommunications Act. The low power radio-frequency devices must
be susceptible with the interference from legal communications or ISM radio wave radiated devices.

«
...
49
50
51
52
53
...
»

Summary of Contents for AP-7131 Series



























































Reviews:

No comments

Related manuals for AP-7131 Series

Brand: Sagem Pages: 19

Brand: Aastra Pages: 2

MatrixPRO-II DVI 16x16

Brand: Barco Pages: 43

Brand: Barco Pages: 5

neutrino series

Brand: Xilica Audio Design Pages: 26

Brand: Matrix Switch Corporation Pages: 61

Brand: Idis Pages: 31

IPAM-1600s Series

Brand: C-Com Pages: 148

Brand: 4G Systems Pages: 2

Brand: axing Pages: 52

Media Board D/120JCT-LS-EW

Brand: Dialogic Pages: 2

Brand: SSV Embedded Systems Pages: 17

iCE40 SPRAM Series

Brand: Lattice Semiconductor Pages: 12

SFD-2 MkIII Jumper

Brand: Anthem Audio Pages: 2

Brand: Matrix Switch Corporation Pages: 54

Brand: Cleerline Pages: 2

PROM Programming Adapters PCA7438F-64A

Brand: Renesas Pages: 18

PCI4-AD-x16HI-BG4

Brand: Serial Cables Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands