18
AP 6522M Access Point
10. Select the
Country Code
of the country where the Access Point is deployed. Selecting a proper country
is a critical task while configuring the Access Point, as it defines the correct channels of operation and
ensures compliance to the regulations of the selected country. This field is only available for the Typical
Setup Wizard.
11. Select
Next
to set the Access Point’s network mode.
12. The Typical Setup Wizard displays the
Network Topology
screen to define how the Access Point handles
network traffic.
13. Select an
Access Point Mode
from the available options.
NOTE
If designating the Access Point as a Standalone AP, it is recommended
the Access Point’s UI be used exclusively to define its device
configuration, and not the CLI. The CLI provides the ability to define more
than one profile and the UI does not. Consequently, the two interfaces
cannot be used collectively to manage profiles without an administrator
encountering problems.
Summary of Contents for AP 6522M
Page 1: ...AP 6522M Access Point INSTALLATION GUIDE ...
Page 45: ...Installation Guide 45 ...
Page 46: ...46 AP 6522M Access Point ...
Page 47: ...Installation Guide 47 ...
