Installation Guide
17
For information on using the Access Point’s Advanced Setup option, refer to the
WiNG Access Point
System Reference Guide
to familiarize yourself with the feature set supported by the WiNG operating
system. The guide is available at
To configure the Access Point using the Typical Setup Wizard:
8.
Select
Typical Setup
from the
Choose One type to Setup the Access Point
field on the Initial Setup
Wizard.
The Typical Setup Wizard displays the
Access Point Settings
screen to define the Access Point's
Standalone versus Virtual Controller AP functionality. This screen also enables selection of the country of
operation for the Access Point.
9.
Select an
Access Point Type
from the following options:
•
Virtual Controller AP
- When more than one Access Point is deployed, a single Access Point can
function as a Virtual Controller AP. Up to 24 Access Points can be connected to, and managed by,
a single Virtual Controller AP of the same Access Point model. These connected Access Points
must be the same model as the Virtual Controller AP.
•
Standalone AP -
Select this option to deploy this Access Point as an autonomous fat Access Point.
A Standalone AP isn't managed by a Virtual Controller AP, or adopted by a controller
.
NOTE
If wanting to adopt the Access Point to a controller or service platform,
use the controller or service platform’s resident UI to connect to the
Access Point, provision its configuration and administrate the Access
Point’s configuration.
Summary of Contents for AP 6522M
Page 1: ...AP 6522M Access Point INSTALLATION GUIDE ...
Page 45: ...Installation Guide 45 ...
Page 46: ...46 AP 6522M Access Point ...
Page 47: ...Installation Guide 47 ...
