Motorola AP 6522M, Installation Manual

Page: 13 / 48

Installation Guide 13
2.6 LED Indicators
AP 6522M Access Points have LED activity indicators on the side of the case.
The LEDs provide a status display indicating error conditions, transmission, and network activity for the 5 GHz
802.11an (amber) radio or the 2.4 GHz 802.11bgn (green) radio.
CAUTION
If not using a 802.3af capable controller to power the AP 6522M,
ensure only the AP 6522M’s designated power supply
(PWRS-14000-148R) is used to supply power to the Access Point.
Using an incorrectly rated power supply could damage the unit and
void the product warranty. Do not actually connect to the power
source until the cabling portion of the installation is complete.
Task 5 GHz Activity LED (Amber) 2.4 GHz Activity LED (Green)
Unadopted Off Blink interval at 5 times a second
Normal
Operation • If this radio band is enabled:
Blink at 5 second interval
• If this radio band is disabled:
Off
• If there is activity on this band:
Blink interval at 1 time per second
• If this radio band is enabled:
Blink at 5 second interval
• If this radio band is disabled:
Off
• If there is activity on this band:
Blink interval at 1 time per second
Firmware
Update On Off
Sensor Mode Blink interval at 5 times a second Blink interval at 5 times a second
!