151
phone does not recognize a spoken voice command, it
prompts you to repeat the command.
“
<contact name>
+ Mobile (Cellphone, Call) / Work
(Office) / Home” –
Your phone displays the corresponding
number listed in your address book. Press the VR key to dial
the number.
Tip:
Voice recognition is greatly improved when you store
both the first and last name of contacts in the address book.
You must say the name as it appears in the contact list
(for example, “John Smith” or “Smith, John”, depending on
how you have set up the contact list sort order).
“Open Digit Dial / Open Dial Pad” –
Puts your phone in
digit mode to dial a phone number. When your phone
displays the phone keypad, press and hold the VR key and
speak the phone number you want to dial. Release the VR
key. Your phone recites the number you spoke and displays
the number on the keypad. If the number is correct, press the
VR key or speak
“Dial Out”
to call the number. If the number
is incorrect, press and hold the VR key and repeat the
number you want to dial (within 10 seconds).
“Open
<application name>
” –
Open the named application
on your phone.
“Go Back / Exit” –
Exit the current function screen.
“Redial” –
Your phone recites the number you last dialed.
“Send Message To
<contact name>
” –
Open the message
composition screen, with the contact’s number in the
To
field.
“Check New Messages / SMS” –
Your phone recites the
number of unread messages you have received and recites
CG.GSM.A780.book Page 151 Tuesday, May 17, 2005 5:42 PM
