Motorola 7528X User Manual Download

Page: 68 / 210

3 - 12

Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual

Keep in mind that you can also use your

Contacts

to choose an e-mail recipient provided an e-mail address is

associated with the contact.

•

Tap

Menu>Add Recipient

, and then choose a

contact

from the list.

•

If you're sending an email to

multiple

people, use a

semicolon

(;) between addresses.

Contacts

Contacts

are available with your e-mail, text messages, voice messages and your phone.

•

Tap on

Start>Contacts

to display your contacts.

Working with the Contacts List

The

Contacts

screen allows you to work with existing entries, search for a particular contact and create

new entries.

Contact Menu Commands

Menu

softkey at the bottom of the screen provides additional commands that allow you to work with the

contacts in this list.

Draft #6

Summary of Contents for 7528X



















































































































































































































Search results

Summary of Contents for 7528X

Reviews:

Related manuals for 7528X

Brands by name

Popular brands

Motorola 7528X, User Manual

Search results

Summary of Contents for 7528X

Reviews:

Related manuals for 7528X

Brands by name

Popular brands