background image

Settings

4 - 7

Appearance Tab – Changing the Theme (Background)

The 

Appearance

 tab allows you to change the background appearance of the Today screen. 

Tap on the 

theme

 or background you want to use. Tap on 

OK

 to assign the background you’ve chosen to 

your Workabout Pro4.

Beaming a Theme to Another Device

You can also 

beam

 your selection to another device. To scan for visible devices and beam a theme:

Choose a 

theme

 or background, and tap on the 

Beam

 button.

The Workabout Pro4 scans for visible devices within range of the hand-held and lists them in the 

Beam

 screen.

Tap on the device to which you want to send the theme.

File Receive Confirmation

 dialog box appears on the device to which you are beaming the theme. If the 

recipient taps on 

OK

, the file is downloaded onto their device. Note that the recipient can also tap on 

Browse

 to 

store the theme file in a different location.

NOTE

You can also use a personal picture as your background. Tap on the checkbox to the 
left of 

Use this picture as the background

, and tap on the 

Browse

 button to locate 

your picture. 

Draft #6

Summary of Contents for 7528X



















































































































































































































Reviews: