Motorola 7528X User Manual Download Page 19

Page: 19 / 210

About This Guide

xiii

•

Total Recall, TweakIt, Dr. Debug

Wireless Data and Voice Communications

•

Bluetooth®

- Integrated

Bluetooth®

V2.1 + EDR (standard)

•

WLAN - XWing2 802.11a/b/g/n WiFi (standard). Optional diversity antenna module available.

•

GPS - Optional GPS module (supports SBAS)

•

Optional Cinterion HSPA + WAN radio incl. GPS Receiver (Supports GLOSNASS)

User Interface

•

Display

- Transflective colour/touch display 9.4 cm (3.7 in) VGA/QVGA (640 x 480) Transflective Colour/touch

display

- Sunlight visibility with 165 cd/m

brightness

•

Keyboards

- Alphanumeric (7528 Long)

- High reliability keypad with ultra-white backlight

•

Voice & Audio

- Walkie-talkie style Push-to-Talk –

VoIP over WiFi

In the Americas, the Workabout Pro4 is not approved to be used with any VoIP application using Wide
Area Network (WAN) or Wireless Local Area Network (WLAN).

- Standard integrated microphone and receiver.

- Standard high volume 86dBA beeper (95dBA beeper with extended ranger laser).

- Optional speech module, certified with Vocollect and Wavelink Speakeasy clients.

Power Management

•

4400 mAh high-capacity Lithium-ion battery – Model No. WA3010

•

Super capacitor power backup

NOTE

802.11a/b/g/n and

Bluetooth

are available simultaneously.

Draft #6

Summary of Contents for 7528X



















































































































































































































Search results

Summary of Contents for 7528X

Reviews:

Related manuals for 7528X

Brands by name

Popular brands

Motorola 7528X, User Manual

Search results

Summary of Contents for 7528X

Reviews:

Related manuals for 7528X

Brands by name

Popular brands