Motorola 7528X User Manual Download Page 46

Page: 46 / 210

2 - 20

Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual

Calendar of Upcoming Appointments

This option is used to map out all your upcoming appointments, meetings and so on in the weeks, months and
years ahead.

•

In the

Today

screen, tap on

Calendar

, or tap on

Start>Calendar

icon to display the calendar applet.

The default calendar displays any scheduled appointments. To choose the format of your calendar:

•

Tap on the

Calendar

softkey – this key scrolls through the calendar formats.

Creating and Editing Appointments

•

In the

Calendar

screen, tap on the

Menu

softkey in the softkey bar, and then tap on

New Appointment

NOTE

You can synchronize the Calendar so that any meetings, appointments and so
on are displayed on your Workabout Pro4 Today screen as well as on your PC.
Refer to

“Synchronizing E-mail with Outlook (PC with Windows XP OS)” on

page 3-9

a nd

“Synchronizing E-mail with Outlook (PC with Windows Vista or

Windows 7)” on page 3-10

for details about synchronizing your e-mail.

Calendar softkey

Menu softkey

Draft #6

Summary of Contents for 7528X



















































































































































































































Search results

Summary of Contents for 7528X

Reviews:

Related manuals for 7528X

Brands by name

Popular brands

Motorola 7528X, User Manual

Search results

Summary of Contents for 7528X

Reviews:

Related manuals for 7528X

Brands by name

Popular brands