A p p l i c a t i o n V i e w s
S u p p o r t e d A p p l i c a t i o n s
D e v i c e M a n a g e m e n t
Page 18
M o t o r o l a V a n g u a r d
DSPStatus
Indicates whether there is a DC SIMM DSP
installed in the motherboard and, if so, the
current status (
up
= installed and operational;
down
= installed but non-functional;
missing
=
no DC SIMM DSP is installed).
Soft-Rev
The revision number of the DC handler software.
Firm-Rev
The DC function revision number (e.g., the DSP
firmware revision number).
DCChan
The maximum number of DC channels
supported.
ChanInUse
The number of DC channels currently in use.
SmltChanUse
The highest number of DC channels in use at any
one time since the last stats reset.
ConnRejects
Number of call requests rejected due to the
unavailability of DC channels.
AggCRatio
Ratio of incoming characters to outgoing
characters for all DC channels over the past
minute.
The following two buttons are located at the
bottom of the Data Compression General
Statistics view:
This button accesses both current and historical
information about the encoder and decoder
queues— see
Queue Statistics View
(Page 18).
This button accesses a view that lets you control
statistics and history buffer reset parameters for
individual DC channels—see
DC Controls View
(Page 19).
Queue Statistics View
Access:
In the Data Compression General Statistics view,
click the Encoder and Decoder Queue Statistics button.
This view provides the following information
about the encoder and decoder queues.
EncFrames
Current number of frames in the encoder queue,
waiting to be compressed.
Encoder and Decoder Queue Statistics
DC Channel Controls
