A p p l i c a t i o n V i e w s
S u p p o r t e d A p p l i c a t i o n s
D e v i c e M a n a g e m e n t
Page 100
M o t o r o l a V a n g u a r d
are listed in the following table.
Table 37
lists the
port option codes and descriptions:
Table 37:
X.25 Port Option Codes
Code
Description
NONE
No option specified.
1980
Use X.25 1980.
NUI
Perform network user ID validation check.
PDN
Connected to Public Data Network.
CUD
Use call user data sub-addressing.
IBAR
Bar all calls coming in from X.25 port user.
OBAR
Bar all calls going out to X.25 port user.
CBCK
Allow routing inbound calls back out this
port.
CUG
Check closed user group; otherwise, CUG
passes transparently.
CAUSE
Pass cause, diagnostic, code in outbound
packets.
DEDO
Delete called address from outbound calls.
DEGO
Delete calling address from outbound calls.
REGI
Replace calling address with configured Port
Address in inbound calls.
REGO
Replace calling address with configured Port
Address in outbound calls.
HOLD
Hold calls over link restart.
NRST
Do not send restart packet on link-up.
BKUP
This is a backup port to be activated if other
ports are down.
SRGI
Select route by the calling address in
inbound calls.
INL
Inter-node link. Link goes to another 6500
device.
INLA
Set with INL option when an X.25 link con-
nection is to a 6500 node using 2.12.04 or
earlier.
DADA
Delete called address in inbound/outbound
call accept packets.
DAGA
Delete calling address in inbound/outbound
call accept packets.
IADD
Include called and calling addresses in call
accepted/connected packet.
DELAY
Enable Delay and Path trace on this link
(link must connected to Rel. 4.xx node).
Table 37:
X.25 Port Option Codes
Code
Description
