Motorola solutions APX N70 User Manual Download Page 77

Page: 77 / 104

Tap

Your radio starts to search for nearby pairable devices.

Tap the name of the Bluetooth enabled device that you want to pair with, then tap

Pair

NOTE:

If the Bluetooth Pairing PIN feature is enabled, verify that the codes are correct

before you begin pairing.

17.4.3

Toggling Bluetooth Audio On and Off

Bluetooth Spkr

will not be available if no Bluetooth enabled audio device is connected.

Procedure:

From the

Home

screen, tap

More

Tap

Bluetooth

To toggle Bluetooth Audio on and off, tap

Bluetooth Spkr

17.4.4

Viewing and Clearing the Bluetooth enabled Device Information

Procedure:

From the

Home

screen, tap

More

Tap

Bluetooth

To view the device information, tap

next to the name of the device.

Tap

Forget

twice, to confirm the request.

17.5

P25 Digital Vehicular Repeater System

Motorola Solutions offers an MSI Certified APX compatible, third party, P25 Digital Vehicular Repeater

System (DVRS). This provides low-cost portable radio coverage in areas where only mobile radio

coverage is available.

NOTE:

Portable subscriber units enabled in the system for Radio Authentication shall be able to

authenticate regardless of whether they are communicating directly on the system or by using a

DVRS.

DVRS can also work with SmartConnect to use broadband coverage for the in-vehicle mobile. Portable

radios communicate through the in-vehicle mobile to the system through the LTE, Satellite, or Wi-Fi

connection. This extends the system coverage when you are away from the vehicle.

MN009207A01-AA

Chapter 17 : Connectivity

Summary of Contents for APX N70








































































































Search results

Summary of Contents for APX N70

Reviews:

Related manuals for APX N70

Brands by name

Popular brands

Motorola solutions APX N70, User Manual

Search results

Summary of Contents for APX N70

Reviews:

Related manuals for APX N70

Brands by name

Popular brands