Motorola solutions APX N70, User Manual

Page: 44 / 104

2 Tap Soft ID , then enter your Soft ID.
3
Tap Done to confirm.
NOTE: If you leave the Soft ID empty, the Work Manager Widget displays the Radio
Alias ID if it is enabled.
4.2.4
CommandCentral Authentication Login
To log into the CommandCentral for the first time, simply follow the First-Time Login steps as follows.
NOTE: After selecting Remember my username , the First-Time Login steps will be skipped on
subsequent logins.
After you have logged in, you can view your agency details (Agency name, Unit ID, Auto logout date
and time). You will be notified when you are about to be logged out when you see a logout timer on the
widget. The timer is displayed 1 hour before the logout time if the session timeout is set to less than 29
days, or 20 hours before if session timeout is set to more than 29 days.
4.2.4.1
Logging In to CommandCentral
Procedure:
1 From the Home screen, tap Shift Manager Launcher .
2 Tap CommandCentral Login , then enter your username or email address followed by your
password.
3 Depending on your login attempt, use one of the following options:
Option Actions
First-time login
a Tap Sign On .
b Scroll down and tap the Received passcodes via
email (if two-factor authentication is enabled).
c Enter the passcode and tap Verify to complete the
login (if two-factor authentication is enabled).
Subsequent login
a Tap Sign On , then enter the verification code gen-
erated by your device (if two-factor authentication
is enabled).
b Tap to complete the log in.
NOTE: You can request to resend the code
to the connected device. The code is 8
characters and can be alphanumeric.
MN009207A01-AA
Chapter 4 : Home Screen Overview
38