Procedure:
1
Gently pull the tab to slide out the SIM card tray.
NOTE:
The SIM card tray must not be removed with a hook or prying tool.
2
Perform one of the following actions:
• Insert the SIM Card in the SIM card tray where the letters "
TOP
" is facing away from the
chassis of the radio.
• Remove the SIM card from the tray.
3
Push the SIM card tray back into the radio and avoid bending it sideways or up or down.
NOTE:
If the SIM card tray does not slide freely, check the orientation of the tray and
reseat the SIM card.
3.4
Attaching and Removing the Accessory Connector Cover
The connector cover shields the accessory connector from damage when not in use.
Attaching the Accessory Connector Cover
Procedure:
1
Insert the slanted end into the slot above the connector.
2
Push connector upward.
3
Press downwards on the accessory connector.
4
Rotate the thumbscrew clockwise to tighten the cover.
Removing the Accessory Connector Cover
Procedure:
1
Rotate the thumbscrew counterclockwise until it disengages from the radio.
2
Rotate outwards and lift the connector cover to disengage it from the radio.
3.5
Using the Carry Holder
Procedure:
1
To insert the radio into the carry holder, perform the following actions:
a
Position the radio within the carry holder with the main speaker facing outward.
b
Slide the radio down into the carry holder until it clicks in place.
2
To remove the radio from the carry holder, perform the following actions:
a
Place the tip of your fingers on the ledge of the carry holder.
b
Push the bottom of the radio until it is released from the carry holder.
MN009207A01-AA
Chapter 3 : Getting Started
31
