Motorline professional JAG Series, User'S And Installer'S Manual

Page: 8 / 13

7A 7B
B
A
B
A
17
18
19
20
21
22
23
24
25
26
EN EN
01 • Unlock the motor (see page 3A).
02 • Loosen the 3 front screws, remove the cover and the profile cover.
03 • Take the gate to the closed position.
04 • Loosen the screw shown in the image (21), so that it is possible to move the micro-switch in
the profile.
05 • Adjust the closure micro-switch (A) until it makes “click” on the pressure piece. Tighten the
screw to secure the micro in that position.
06 • Take the gate to the open position.
07 • Loosen the screw shown in the image (24), so that it is possible to move the micro-switch
in the profile.
08 • Adjust the closure micro-switch (B) until it makes *click* on the pressure piece. Tighten the
screw to secure the micro in that position.
A • Micro-Switch de fecho.
B • Micro-Switch de abertura.
09 • Test the door manually and
if necessary readjust the micros,
as indicated in the previous
paragraphs.
10 • When finished, place the
profile cover and the plastic
cover.
11 • Repeat the whole process
for the other motor.
04. INSTALLATION
MICROS ADJUSTMENT
04. INSTALLATION
MICROS ADJUSTMENT
Example of the gate with inside opening