Motive Power Industry BLUR 150, Service Manual

Page: 103 / 234

AUTO-ENRICHENER (AUTO-CHOKE) SYSTEM
The automatic enrichener (automatic choke) device consists of the PTC heater A, the
thermo-wax B and the plunger/needle
c
. When the thermo-wax B is cold, the plunger/needle
c
moves upward, Fuel is drawn into the enrichener circuit from the float chamber
d
.
Enrichener jet
e
meters this fuel, which then flows into fuel pipe
f
and mixes with the air
coming From the upper part of the float chamber
g
. The mixture, rich in fuel content, reaches upper
part of The fuel pipe and mixes again with the air coming through a passage extending from main
bore
h
.
The two succesive mixings of fuel with air are such that proper fuel/air mixture for starting is
produced when the mixture is sprayed out through outlet port
i
into the main bore.
NOTE:
An enrichener is operated almost the same way as a choke.
When the engine is cold:
The automatic enrichener passage is always open as the thermo-wax remains atomospheric temperature.
When the engine is started:
According to the PTC heater temperature, the thermo-wax gradually expands and closes enrichener
passage by the needle of the plunger.
99