Motive Power Industry BLUR 150, Service Manual

Page: 14 / 234

(4) PERIODICAL MAINTENANCE TABLE
MONTHS/DISTANCE(IN MILE)FOR CHECKING
Item
Model
4T
Checking Content
1 or
200
mile
3 or
1800
mile
6 or
3600
mile
9 or
5400
mile
12 or
7200
mile
15 or
9000
mile
18 or
10800
mile
Engine oil* 4T BLUR 150:800cc total 1000cc
BLUR 220:1000cc total 1400cc R Replace it initially 200 mile,
and then replace it per 1800mile
Oil Filter BLUE-150 Replace R replace it per 3600mile
Coarse oil filter* (on oil
draining bolt) 4T
Clean or replace it if necessary C
clean it initially 200mile
and then replace it per 3600mile if necessary
Air cleaner 4T Crack and blockage check. I
Air filter 4T Clean or replace it if required I I I I I I
Gear oil* 4T BLUR-150: 90cc, total 110 cc
BLUR-220: 110cc, total 130 cc
R R I I R I I
Disk & drum brake 4T Leaking and function check I I I R I I
Clutch shoes* 4T Check or replace it if necessary I I I I I
Tires 4T Worn-out check or replace it if
necessary I I I I
Wheel bearing* 4T Fasten tightly if loosen I I I I I I
Front fork* 4T Leaking and function check I I I I I I
Steering head bearing* 4T Check looseness. Adjust it if
required I I I
Rear absorber* 4T Leaking and function check A A A
Main/Side Stand 4T Function check or replace it if
required I I I I
Nuts, bolts, fasteners 4T Tighten it if required I L I L I L
Battery 4T Recharge the battery it required.
Clear the poles.
I
I I I I I
Valve gap* 4T BLUR150: 0.08mm/ IN&EX
BLUR220: 0.08mm/ IN&EX Adjust
it when
necessa
ry
C I C I C
Spark plug* 4T Clear or replace if required I A A A
V belt* 4T Worn out check or replace if
necessary. R I R I R
Fuel feeding system* EXCEPT
EMS
Crack and blockage check.
Replace it if necessary.
Fuel feeding system * EMS
ONLY
(Injection)
Inspect hose, clamp, and replace
the filter per 11200mile
I R I
Engine idle speed* 4T 4T engine: 1700±100 rpm A A I I R
Carburetor idle A/F
Adjustment* 4T Check and adjust referring to
CO/HC Percentage.
A A A A A A A
EMS function check* EMS
ONLY
(Injection)
Inspect EMS function, and clear
the defect memory if necessary I
A A A A A
REMARKS
：
1. A : adjust C : clean I : inspect, or replace if necessary L : lubricate R : replace
2. Items with “*” mark indicate our recommendation to have it done by Genuine dealer.
NOTE 1
：
For 4T engine, the engine oil shall be changed completely after run-in period 300km or one month later.
This can make sure the engine runs smoothly.
NOTE 2
：
The exchange of brake fluid
1. After disassembling of brake main cylinder or caliper, do change the new fluid.
10