Motive Power Industry BLUR 150, Service Manual

Page: 23 / 234

9.Oil indicator malfunction (Only available for 2T engine)
(a)The oil lamp doesn’t light up, (when the main switch is at “ON”position)
fuse burn-out
battery has no power
main switch abnormal
circuit plug dropped off
main wiring disconnected
bulb burn out
electric plug is loose
or disconnected
main wiring disconnected
wrong wiring connection
Float upward: lamp Extinguishes
float faulty
oil gauge switch dis-
Float downward: lamp turn on connected or short circuit
(b)Oil is enough but the indicator turns on all the time (when the main switch is “ON”)
electric plug is loose
or drop-off
main wiring disconnected
wrong wire connection
float faulty
oil gauge switch
disconnected or short circuit
Float upward: lamp
Extinguishes oil tank distorted
Float downward: lamp
some impure material
Turns on dropping in
Check and adjust
Turn the signal lamp
On. Check wiring
Of battey
Normal
Lamp dims, light does
Not flash, no light
Remove the oil lamp,
And connect with
Battery directly
Lamp lights Lamp does not light up
Check electric plug
Good condition No good
Remove oil gauge,
Check the lamp light
Up or not by moving
The float
Good No good
Check and adjust Trouble condition
Check all electric
plug
Good Disorder
Remove oil gauge,
Check the lamp by
Moving the floating
Good Disorder
Trouble condition The reason
The reason
19