Motion VISION X User Manual Download Page 32

Page: 32 / 39

PECIFICATIONS

Frequency Response . . . . . . . . . . . . . . . . . . . . .

Crossover Frequency. . . . . . . . . . . . . . . . . . . . .

Amplifier Power . . . . . . . . . . . . . . . . . . . . . . . .

High Frequency Drivers. . . . . . . . . . . . . . . . . . .

Low Frequency Drivers . . . . . . . . . . . . . . . . . . .

Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Components . . . . . . . . . . . . . . . . . . . . . . . . . . .

Inputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Wireless Connectivity . . . . . . . . . . . . . . . . . . . .

Wireless Input . . . . . . . . . . . . . . . . . . . . . . . . .

Wireless Output . . . . . . . . . . . . . . . . . . . . . . . .

Decoding . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Power Draw . . . . . . . . . . . . . . . . . . . . . . . . . . .

Remote Battery . . . . . . . . . . . . . . . . . . . . . . . . .

Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Dimensions (HxWxD) . . . . . . . . . . . . . . . . . . . .

43–23,000 Hz ± 3 dB

3,000 Hz

100 Watts (200 Watts peak) combined total
output across 7 amps.

Three 1” x 1.4” (2.6cm x 3.6cm) Folded Motion
Transducers with 5.25” x 1.75” (13.3cm x
4.4cm) diaphragm.

Four 4” (10.2cm) fiber cones with extended throw drive
assembly. Non-resonant asymmetrical chamber format.

Ported

DSP based preamplifier.

(1x) Optical SPDIF (digital optical), (1x) Coax
SPDIF (digital coaxial), (1x) Analog 3.5mm
(1x) Ethernet, (1x) AC Power

(1x) Subwoofer Out via Analog RCA

2.4 GHz and 5.0 GHz; 802.11 g/n

DTS Play-Fi

Built-in SWT-2 Subwoofer Wireless Transmitter
compatible with select MartinLogan subwoofers.

Dolby

Digital, DTS Digital Surround™

Max: 120 Watts, Idle: 9 Watts

(2x) AAA

20.5 lbs. (9.3 kg)

5” x 39.9” x 5.85” (12.7cm x 101.3cm x 14.8cm)

*Specifications are subject to change without notice.

Summary of Contents for VISION X








































Search results

Summary of Contents for VISION X

Reviews:

Related manuals for VISION X

Brands by name

Popular brands

Motion VISION X, User Manual

Search results

Summary of Contents for VISION X

Reviews:

Related manuals for VISION X

Brands by name

Popular brands